30th May

Tools used - Hammer, dog tail, straight edge, level, nail gun [gas and air] radial saw, 8m tape, sharp pencil,

safety gear used - safety muffs, boots and glasses

Today was spent on finishing straighting and plumbing the walls.
Then nailing them off  2x100mm galv nails 2 in the top and 2 in the bottom of the blocks [all the blocks up the length of the stud]

Then we started putting in the last of the dwangs. measure each one then cut with the radial saw. Nailed them in from beneath. Most angled up from the outside of the stud [when possible] other wise they were nailed up into the dwang itself back into the stud [again 2 x 100mm galv nails]